|
|
Piston for Racing Engine Škoda 110
Gerák, Jakub ; Maršálek, Ondřej (referee) ; Svída, David (advisor)
This Bachelor's thesis deals with the defect of the piston Metalex for a racing engine Škoda 110. The aim of my work is to find the reasons for the piston defect, to check the most stressed parts by strength calculation and suggest a possible structural design so that the piston withstands all stresses throughout the required lifespan.
|
|
|
Piston for 96kW 4-stroke SI-engine
Josefíková, Kateřina ; Svída, David (referee) ; Dundálek, Radim (advisor)
This bachelor`s thesis will deal with calculating suggestion and structural solution piston for 4-stroke petrol engine. Next then determination basic dimensions engine and crak mechanism. On the basis empirical detail will determine basic dimensions piston. For designed kinematics crank mechanism will perform fort control critical sectin piston
|
|
|
Powertrain of in-line three-cylinder diesel engine
Riemel, Pavel ; Novotný, Pavel (referee) ; Píštěk, Václav (advisor)
Objective of bachelor’s thesis is for main predetermined geometric, thermodynamic and operation parameters cylindrical unit of line three-cylinder compression-ignition engine perform calculation of thermodynamic cycle, project basic dimensions of piston group and for noted operating modes perform strength check of con rod eye. Resulting values compare with comparable compression-ignition engine and verify its appropriate functionality. In preamble of work is mentioned compression-ignition engine, its basic usage, principle of function and description its main parts. The work is compound of two basic parts. The first contains description of calculation with related graphic and the second calculating supplement in which are calculations of thermodynamic cycle, forces reacting on piston group, strength calculation and control of con rod eye. At the close results of calculation are analysed.
|
|
|
Powertrain of in-line five-cylinder diesel engine
Zarambukas, Michalis ; Novotný, Pavel (referee) ; Píštěk, Václav (advisor)
The aim of this graduation theses is geometrical and thermodynamic calculation of determined five-cylinder diesel engine and calculation of operation parameters of cylindrical unit and then to compare them with real motor and strike the balance. Other step is to work out thermodynamic cycle and draw the result in p-V diagram. Then to calculate power, effecting on piston which includes proposal of basic proportion of piston and wrist pin, and it follows weigh of piston group and maximal quickening and inertial force of piston group, calculation of specific pressure and pressure in wrist pin. Other purpose is to determine basic proportion for piston rod and to focus on material qualities of con rod eye and bronze case, determination of maximal pressure due to inertial forces comming from gas pressure and security against possible slip and tiredness. At the beginning is described diesel engine from its foundation, its activity to its use in company. At the close are reviewed the results of the calculations.
|
|
|
Cyclic Engine Visualization
Fajkus, Jan ; Granát, Jiří (referee) ; Přibyl, Jaroslav (advisor)
Objective of this thesis was acquaint oneself with theory of cyclic engines, understand their principle, describe their conjunctive and different properties. Program part consisted in creating visualization of chosen engines in C/C++ language using openGL.
|
|
|
Advanced Solution to Piston Assembly Dynamics
Dlugoš, Jozef ; Furch,, Jan (referee) ; Kučera, Pavel (referee) ; Novotný, Pavel (advisor)
Hlavní cíl této práce je vyvinout pokročilý výpočtový model dynamiky pístové skupiny. Kontakt mezi pístem a válcem je zprostředkován skrz vrstvu maziva nebo pomocí kontaktu nerovností. To vede k různým režimům mazání, tudíž k různým silovým interakcím působících na plochy kontaktní dvojice. Během řešení hydrodynamiky a kontaktu nerovností, je nutné zahrnout deformaci pístu a válce do výpočtu—přirozeně iterační proces. Jelikož požadavky na výpočtovou síť kontaktních sil a deformaci těles se liší, byl navržen robustní mapovací algoritmus. Výsledky vyvinutého výpočtového nástroje jsou experimentálně verifikovány. Pro tento účel je uskutečněno měření sekundárního pohybu pístu pomocí laserových snímačů vzdálenosti. Měření je vykonáno na experimentálním motoru s bočním vedením ventilů a průhlednou hlavou válce, aby byl přítomen kompresní tlak ve spalovací komoře. Naměřený boční pohyb pístů je znehodnocen. Proto je další analýze potrobeno pouze úhlové natočení pístů. Shoda mezi naměřenými a vypočítanými výsledky variuje pro různé části pracovního cyklu. Dobrá shoda je dosažena během komprese a expanze. Naopak výrazné rozdíly nastávají, když boční síla dosahuje nízkých hodnot: sání a výfuk. Hlavní přínos této práce je vytvoření výpočtového nástroje, který je schopný zahrnout výše popisované jevy, které mají podstatný vliv na dynamiku pístové skupiny. Bohužel to vede k dlouhým výpočtovým časům, zvláště když je zahrnuta deformace. Tento problém řeší navržený paralelní výpočet. To je založeno na paralelizaci podprogramu během vyčíslování citlivostní analýzy. Tímto způsobem je řádově redukován výpočtový čas.
|
|
|
Piston for Two Stroke Motorcycle Engine
Král, Jiří ; Beran, Martin (referee) ; Svída, David (advisor)
This bachelor work deals with a proposal and construction solution of a piston for two stroke motorcycle engine. The thesis is focused to basic dimension of piston, strength calculation of the main stressing places of piston and some possible construction enhances. Part of this work is also short summary of development for two stroke motorcycle pistons.
|
|
|
Piston for Bioethanol Engine
Žilinský, Ondřej ; Ramík, Pavel (referee) ; Svída, David (advisor)
The aim of this thesis is to design Husqvarna FE 501 turbocharged engine piston for Formula Student competition using bioethanol as its fuel. Proposed concept originates in background research on design solutions of modern combustion engine pistons. FEM simulations are used for piston design.
|
|
|
The Rationalization of Production Part of Injection Pump
Havel, Marian ; Prokop, Jaroslav (referee) ; Osička, Karel (advisor)
This thesis focuses on the rationalization of the production process of plungers and elements of injection pumps in relation to improving the quality of the final products. Today’s technology, which mainly uses single-purpose machines where the production quality markedly depends on the abilities and activities of the operator, will replaced by modern machining centres and CNC machines for grinding all functional parts of the plungers, coupled with modern measuring devices. These production machines with the support of measuring devices will improve the productivity of production and the general quality of the produced components.
|
|
|
Alternative conceptions of combustion engines
Šťáva, Martin ; Fojtášek, Jan (referee) ; Zháňal, Lubor (advisor)
The subject of this bachelor´s thesis on the topic Alternative conception of combustion engines is description of chosen historical and present alternatives to conventional piston combustion engine with crankshaft. The aim of this thesis is to create thesis that relates description of historical evolution of alternative construction combustion engines. Alternatives are described in terms of construction, operating principle and properties. In past were developed plenty of different conceptions of combustion engines. However most of them have never been successful because of many technical problems, complicated construction or other shortages.
|
guest ::
